Wednesday, November 6, 2013

Building a hexacopter drone with the help of CNC routing and 3D printing

After building a couple of 3D printers and a CNC router, I found that many of my friends would quite reasonably inquire as to what I actually make using these machines.  For a long time my reply was that I used them mostly to make 3D printer and CNC router parts, after a while allowing me to come to the realization that my obsession with these machines was, quite literally, feeding itself.

All that changes with my latest project:  to build a heavy-lifting, full-featured aerial hexacopter drone with as many parts as possible being CNC routed or 3D printed in-house.

The first thing that I had to settle on was what design to use.  I had been following the progress of many projects at DIY Drones.  One of their very active participants, Jeremy Guillory, published this blog post describing cutting a bunch of hexacopter frame parts out of Lexan (polycarbonate) using a water jet.  He also supplied the CAD DXF file that I could use to make those same parts with my CNC router.

The next step was to figure out what material to use.  People have been building multi-rotors out of almost every light/strong material imaginable.  At the Holy Grail high end is of course, carbon fiber.  But the cost is very high and if I mess up a cut, I waste a lot of money.  I could have also done it in fiberglass or Aluminum.  In the end, I was persuaded by a fellow I met at this year's NYC Makerfaire that I should use a material called Dibond.  Dibond is a composite material consisting of a polymer sandwiched between two super-thin sheets of Aluminum.  It is light, yet strong and rigid.  It also has some helpful vibration dampening qualities.  Best of all, it happens to be inexpensive.  I bought 5 1/8" Dibond sheets for about $10 each, shipping included.  Cutting all the parts required 1 and a half.  I had to kill the job at one point when an inadequately-secured part got sucked-in by the bit but I was able to zero out the CNC machine and continue.



The Aluminum arms can be acquired quite inexpensively from HobbyKing.com ($0.88 each!).

My goal, beyond documenting this build is to leave my fellow makers with instructions to build their own full-featured aerial robot at the lowest possible cost.

Stay tuned for more shortly.

34 comments:

  1. It looks that you have put tremendous effort finding the facts. I really appreciate your research work. Hope to read more articles on your blog site.

    custom CNC machining

    ReplyDelete
  2. I liked the way you wrote the article. It was very straightforward and your knowledge on the subject is fantastic.

    glass cnc machining

    ReplyDelete
  3. This blog has turned me into a follower. I’m very impressed by your work and I’m adding you to my list of favorites.unfilled polyimide

    ReplyDelete
  4. This is a really good idea that you have going on.
    หนังออนไลน์

    ReplyDelete
  5. This is very good thought that you have shared through your blog post!! ceramic machining services

    ReplyDelete
  6. The advanced best rc drones however have considerable controllable range and can be flown for long distances

    ReplyDelete
  7. Controllable range is an important consideration when buying drones for aerial photography as you would have to remain within this range when taking photos.rcjudge

    ReplyDelete
  8. A representative making a duplicate on a photocopier. ThinkStock. thing. The meaning of a photocopier is a machine used to make a copy duplicate of data or designs on papers put on or bolstered into the machine. If you want to know more, Please check out here: o risen copier singapore

    ReplyDelete
  9. Thank you for sharing valuable information nice post,I enjoyed reading this post.

    หนังออนไลน์

    ReplyDelete
  10. Thanks for the information, Great innovation. You can visit precision sheet metal machining to get one of your own machine.

    ReplyDelete
  11. The https://www.fullydroned.com/ support is going to keep the camera stable during the drone's flight, allowing it to take better photos and videos

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. I should thank you for writing on this topic, very useful information you have given through this blog regarding education sector. I will visit again to get more information.
    evenheat kiln for sale

    ReplyDelete
  14. I know these steps, but I don't know when drones can work well. Thanks for your suggestion.

    ReplyDelete
  15. One of the most appealing and bewitching blog that I read recently.
    pneumatic parts near me

    ReplyDelete
  16. This is something I was searching for many days. My thirst has been quenched now after reading your article. I am highly thankful to you for writing this article.
    glass cnc machining

    ReplyDelete
  17. Are you a beginner to the drone world? If so, getting a drone fit for a beginner is all you need to get started, so you won't need to spend more than 200 dollars. https://skylum.com/blog/best-drones-under-100

    ReplyDelete
  18. Dibond is a composite material consisting of a polymer sandwiched between two super-thin sheets of Aluminum. It is light, yet strong and rigid. Best for making drones. https://techcompact.com/drone-720x-review/

    ReplyDelete
  19. You can acquaint your clients with a famous result of your association by utilizing it in your organization's logo. Numerous well known carriers and shoe producing monsters have utilized this effectively and gotten extraordinary reaction additionally from their focused on client portions. The well known item that you use in your logos should be dynamic and prevalent among your clients. Else, you would make perplexity in the psyches of your planned clients. logo design service

    ReplyDelete
  20. แทงบอลออนไลน์ การเดิมพันที่ได้รับความนิยมเป็นอันดับต้นๆ ในเว็บไซต์การเดิมพันหลายๆ ชนิด เพราะนักเดิมพันsbobetสามารถสร้างรายได้เสริมจากการ แทงบอล sbobet ได้

    ReplyDelete
  21. A Good Laser Marking Machine Should Have Very Excellent Marking Function on Various Kinds of Non-Metal Materials, For example, Wood, Plastic, Leather, Plastic, Fabric, Paper, Acrylic, Ceramics, Glasses etc. laser marking machine

    ReplyDelete
  22. It was necessary for someone to write on this topic and you grabbed the heart of millions by taking the initiative which is enough to bring the evolution. Thanks for bringing it in light.
    cnc machining service hard materials

    ReplyDelete
  23. You have a very clear view over the subjects which make it very simple to comprehend. Thank you so much.

    ceramic machining services

    ReplyDelete
  24. I am frequently to blogging i truly appreciate your content. Your content has truly peaks my interest. My goal is to bookmark your web site and maintain checking for brand spanking new details. https://royalcbd.com/product/cbd-oil-250mg/

    ReplyDelete
  25. An incredibly interesting examine, I may possibly not concur entirely, but you do make some very valid points. mlb중계


    ----------------------------------------------------------------

    Hey there, Can I copy this post image and implement it on my personal web log? 메이저리그중계

    ReplyDelete

  26. That's so nice information, thanks to share this awesome post with us, this technique is really so superb or useful for us...I feel great to find all these information at in this blog...!!

    glass cnc machining

    ReplyDelete
  27. You made some decent points there. I looked on the web with the problem and discovered most people will go in addition to with all your site. 스포츠중계


    -----------------------------------------------------------



    I love this info presented and possesses given me some type of resolve forpersistance to succeed i really enjoy seeing, so sustain the excellent work. 해외스포츠중계

    ReplyDelete
  28. Very good written post. It will be valuable to anybody who utilizes it, including myself. Keep doing what you are doing – i will definitely read more posts. sheet metal cutting machine

    ReplyDelete
  29. I discovered your blog site on google and appearance a few of your early posts. Keep up the excellent operate. I simply extra the RSS feed to my MSN News Reader. Looking for forward to reading more on your part later on!… 챔피언스리그중계


    ---------------------------


    Would love to constantly get updated great blog ! . 우리카지노

    ReplyDelete
  30. Hi, your site is really well done. thanks for all the information. I’m sending my friends to read this article. 토토사이트

    ReplyDelete
  31. Thanks for the tips on credit repair on this amazing web-site. What I would offer as advice to people will be to give up this mentality that they may buy at this point and shell out later. As a society all of us tend to do this for many things. This includes trips, furniture, and items we’d like. However, you have to separate a person’s wants from all the needs. While you are working to raise your credit score make some trade-offs. For example you possibly can shop online to economize or you can look at second hand suppliers instead of high priced department stores regarding clothing. fiber laser tube cutting machine

    ReplyDelete
  32. Awesome brief article! I absolutely had the exact reviewing. I hope to share added by you. I know you possess very good information into coupled with ideas. I will be exceedingly fulfilled with this particular information and facts. China press brake

    ReplyDelete
  33. I get pleasure from, result in I found exactly what I used to be looking for. You have ended my four day lengthy hunt! God Bless you man. Have a great day. Bye cnc services

    ReplyDelete