Sunday, December 18, 2016

Making a Beautiful and Functional Magnetic Knife Storage System

Our family has long used magnets to hang our knives. The problem has been that the existing knife holders were too short to hold all our knives and were not very good looking. I researched the topic and found that one could combine a nice piece of hardwood with rare earth magnets to make something beautiful that would solve the problem. I started with an $11 piece of Maple from Home Depot. The next step was to cut it to size and bevel its outer edges with my table router. The final woodworking act was to use the table router to carve a half-inch-wide channel down the center. At first, I took some bad advice that I had found online and left a 1/8" gap between the surface and the magnet but later found that to have any useful attraction, I would need to re-route that gap to be 1/16". This was the resulting piece (After being polyurathaned):


The next step was to add the magnets.  I acquired 100 1/2"x1/2"x1/8" powerful rare-earth magnets for around $50 on ebay:

They were very difficult to separate from one another and by the end of the day, my right thumb was feeling quite numb but with some time and work, the magnets filled the channel cut by the router.  Part of the effort was aligning the magnets so that they stuck to each other.  If they were aligned properly, there was a danger that they would collide to violently.  These magnets are so powerful that they can collide with each other destructively, leaving expensive magnet shards.  I lost a couple in this manner but was thankfully left with enough to finish this project.

The result was as good as I had hoped for:

 The only thing remaining is to cover those counter-sunk screw holes with little wood disks.  Other than that, I am happy with the outcome.


  1. Replies
    1. Machine Learning Projects for Final Year machine learning projects for final year

      Deep Learning Projects assist final year students with improving your applied Deep Learning skills rapidly while allowing you to investigate an intriguing point. Furthermore, you can include Deep Learning projects for final year into your portfolio, making it simpler to get a vocation, discover cool profession openings, and Deep Learning Projects for Final Year even arrange a more significant compensation.

      Python Training in Chennai Project Centers in Chennai

  2. I like to read your blog post with great information. I get a good idea from this wonderful blog.
    ทางเข้า sbo
    ทางเข้า sbobet

  3. This comment has been removed by the author.

  4. Otherwise, maintain each knife as it normally should be. Hand wash your knives, only use them on wooden or rubber cutting boards, and use each knife for it's proper job.

  5. I really like your site and content so much,thanks for sharing the information keep updating, looking forward for more posts.


  6. Great – I should certainly say I’m impressed with your site. I had no trouble navigating through all tabs as well as related info. The site ended up being truly simple to access. Great job.