Monday, September 9, 2013

QU-BD Revolution XL Review Part 2

I have spent hours upon hours putting this machine through its paces under grueling conditions and have much to report, both good as well as things that can be improved upon.  I will start with the good, actually, great.  This thing is as fast as it gets.  Check out the 3D printing of this Samsung Galaxy 4 case (http://www.thingiverse.com/thing:100129):



My adventures have not been without their frustrations and it is only fair that I disseminate them.  I have bathed in frustration for a few days now but I really have nobody to blame.  I have concluded that some of my problems were likely caused by software.  I originally installed Repetier Host on a family computer.  When evidence of Y-axis slippage showed itself, I jumped on hardware, probably mistakenly, but because I had experienced axis slippage in my reprap past.  After loading the software on a new laptop, things went better -- until they didn't.  I had to abort that flashlight-lit Galaxy phone case print when I noticed that the LM8UU linear bearing that supported the right side of my Y axis had shimmied loose:


I can see that a red adhesive had been used to adhere the bearing to its Y-axis parent, but not successfully.  I will ask Nathan, the head engineer at QU-BD what adhesive I should use to make sure it stays put the next time.

The second problem that I encountered is more important, notably the Z-axis end-stop.  The X and Y end-stops are not that important because they do not dictate one of the most critical factors in 3D printing:  how close is the first layer to the bed.  I have found that the mechanical end-stop on the Z axis of the RXL to be finicky.  On a couple of occasions, I tried to home my axes and the Z end-stop did not trigger.  This was bad.  I quickly hit the Emergency Stop and then spent some time re-aligning the bed.  Right now, there is no good way to calibrate the Z axis.  There is a screw-hole at every corner of the bed but only two screws were installed.  This leaves the mechanical Z-limit switch -- something that I have found works differently from one moment to the next.  Home it when the bed is cold, it is a certain distance from the bed.  Try it when the bed is hot, something different.  Right now, the only way to tweak your Z limit is to carefully bend the Z limit switch lever.  My suggestion to QU-BD is that they leave mechanical end-stops on the X and Y axes but that they substitute their Z mechanical endstop with something more precise like a hall-effect end-stop or opto-end stop and that they provide a screw to adjust it.

I don't want to seem overly-critical.  This is nothing short of a groundbreaking machine.  When I look at it, I see a labor of love;  something I would be proud to release to the world.

44 comments:

  1. Hi Paul,
    Would you know what software I might need to view the movies? All I see is a black box with a white x in the corner. I'm using IE 10.0.8 on a new Windows8 machine.
    Hoping to eventually see your QU-BD movies.
    hgk

    ReplyDelete
  2. Performing a reset on IE fixed my problem. Thanks for the top quality videos.
    hgk

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Fantastic write-up, many thanks. I just agreed to your rss feed! https://royalcbd.com/cbd-legal-status/

    ReplyDelete
  8. สมัครยูฟ่าเบท เว็บไซต์แทงบอลออนไลน์ ที่เปิดพนันบอลเยอะที่สุด ufabet1688x เปิดรับวางเดิมพันกีฬาทุกประเภท อาทิเช่น แทงบอลสเต็ป แทงบอลเดี่ยว หรือจะเป็นการพนันบอลล่วงหน้าการ พนันบอลสด แทงบอลสดออนไลน์

    ReplyDelete
  9. เว็บดูหนังฟรี HD movie2news.com

    ReplyDelete
  10. Thanks for the good information. ดูหนังฟรี
    movieplotfree.com

    ReplyDelete
  11. Thanks for joining us on this fun quilt along, we’re so happy you’re here!

    ดูซีรี่ย์
    moviehd2024.com

    ReplyDelete
  12. ทางเข้า PG SLOT ให้บริการตลอด 24 ชั่วโมง เว็บไซต์สล็อตออนไลน์ที่ได้รับการการันตี​จากนักพนันว่าเป็นเว็บที่ดีที่สุด เล่นได้ทุกระบบ เว็บของเรานั้นไม่ได้มีให้คุณเล่นทดลองเล่น พีจีสล็อต

    ReplyDelete